Cam Follower and Track Roller - Stud Type

Contact Now

Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

 

 

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.

 

 

CONSOLIDATED BEARING CRSBCE-10-1 Cam Follower and Track Roller - Stud Type

B86 12,7
KOYO 9,52

CONSOLIDATED BEARING CRSBC-8-1 Cam Follower and Track Roller - Stud Type

110x169.500x56 110,000 mm
110,000 56,000 mm

CONSOLIDATED BEARING CRSBC-64 Cam Follower and Track Roller - Stud Type

5 mm 3
S603-2Z 5

OSBORN LOAD RUNNERS HPC-150 Cam Follower and Track Roller - Stud Type

20000 N 19.00 mm
72.0000 mm 9000 rpm

OSBORN LOAD RUNNERS HPC-72 Cam Follower and Track Roller - Stud Type

KOYO 49,2
41,275 19 mm

OSBORN LOAD RUNNERS HPC-76 Cam Follower and Track Roller - Stud Type

21 21 mm
7 12x21x7

OSBORN LOAD RUNNERS HPC-200 Cam Follower and Track Roller - Stud Type

20,638 mm 84 kN
41.275x76.2x22.225 19,05 mm

OSBORN LOAD RUNNERS HPC-100 Cam Follower and Track Roller - Stud Type

95 3600 kN
1000 r/min NJ2992

OSBORN LOAD RUNNERS HPC-80 Cam Follower and Track Roller - Stud Type

10 mm 17x35x10
10 mm 3,25 kN
1/10